Host selection On line dust monitoring system The monitoring data are: wind direction, wind speed, humidity, temperature, TSP, PM10, PM2.5, noise. Optional equipment can be used for data exchange and control equipment start and stop with outdoor dust suppression system. Antifreeze system, high pressure blowback pipe internal retention of water, to prevent the pipeline in the cold environment frost crack. When the temperature is below the set value, the anti freezing system will start automatically. The product has the characteristics of good atomization effect, low water consumption, flexible installation and layout. It can be installed with multiple units connected to the grid or single unit independently. Applicable industries: mine, coal yard, petrochemical, power plant, foundry, construction site, square, community, concrete industry and other places with high temperature dust.
PLC intelligent spray pile
The new intelligent spray pile system is made up of high pressure water supply mainframe, plastic spray rust protection pole (4M 6M's other rod length can be customized), intelligent rotary head and PLC man-machine interaction system.
The new intelligent spray pile is a main and effective dust suppression product for outdoor occasions with large dust emission. Driven by the power source of the water pump, the device pressurizes the water to 80-100kg high pressure, and sprays the fog to an area with a radius of 8-15m through the principle of water fog. The product has the characteristics of intelligent, multi control mode and large dust suppression coverage. It is generally arranged on the site where the dust is concentrated, such as road, storage yard, stock yard, etc.
The unique advantages of PLC human-computer interaction system are as follows:
The main engine of the high pressure water supply can be customized according to the demand. The maximum high-pressure water supply main engine can be towed by 1 stations with 4 intelligent spray piles, which are opened and closed by the solenoid valve. The operation of any single pile and the operation of multiple piles can be realized.
Each head is equipped with an independent electronic pulse type rotating pan tilt, and the rotation speed and rotation angle of the rotating pan tilt can be set at any value through PLC human-computer interaction system（ Speed 0-100%, angle 0-360 °）
The PLC man-machine interaction screen can monitor the running state of the equipment, the real-time running angle of the head, the running speed and the opening and closing state of the solenoid valve.
.
The PLC control system can set up 3 running periods per day (customers can set the time of switching devices arbitrarily according to the actual demand). Each intelligent spray pile can set up the time of opening and stopping independently (the intermittent operation function can be realized).
.
The spray host can also monitor the operation pressure of the equipment through the PLC control system and adjust the running pressure of the equipment in real time.
The spray main engine is equipped with a frequency conversion automatic voltage stabilizing system. It can keep the pressure value constant when switching single pile and multiple piles to prevent pressure rise and fall.
Advantages of the new intelligent spray pile:
The system uses high-pressure main engine, with good atomization effect, less water consumption and saving water resources.
The installation is convenient and the water source is municipal tap water.
Full automatic intelligent control, reduce labor rate, improve operation efficiency.
There is no water on the ground and there is no impact on the traffic.
It can run all day and all area automatically. It can operate normally in high temperature, low temperature and high humidity environment.
Meet the needs of field operations, with wind, rain, dust and other functions, to meet the IP65 protection level.
There is no need to spray water on roads to reduce the operation cost of dust and haze prevention.
The dust and haze removal effect of the system is remarkable, which can control the road dust very effectively.
Configuration of fog pile head
The machine head has a hood, stepper motor control power box, motor driver, PLC controller, touch screen, steel body and other electrical components. Thus, the angle and speed can be adjusted arbitrarily, and the fog pile and water pump can work synchronously. Domestic famous Chint or Schneider or above brands shall be used for electrical components.
A four wire connection method: one drag four, that is, a host pump with 4 fog piles, and the main pump working fog piles simultaneously spray. For power connection, each fog pile needs 220 V power supply, and four fog piles need parallel power supply. The signal (i.e. passive signal line) is generally connected from the water pump to trigger the four fog piles and the water pump to rotate at the same time. The water pipeline also needs to be distributed from the main engine to each fog pile. In general, 304 seamless stainless steel pipe is used for infrastructure construction, and high-pressure steel wire hose is used for connecting fog piles. The maximum pressure of steel hose is 200kg, and the inner hole is generally 6-16mm.
The height of steel body of fog pile is generally 4m, 6m and 12M, and the material is generally 45 # steel, with overall hot-dip galvanizing and plastic spraying treatment. Customers can also make steel parts. The embedded size of steel body is four hole flange, the hole spacing is 170mm for 4m, 240mm for diagonal, 24.8mm for 6m, 340mm for diagonal, 300mm for 12M, 424mm for diagonal.
Prouct dwtail
The product has the characteristics of good atomization effect, low water consumption, flexible installation and layout. It can be installed with multiple units connected to the grid or single unit independently.
1. Long spray distance, the nozzle can be 360 mm ° Rotating, high pressure plunger pump can make jet radius up to 15 meters, covering PFM area of 500-1000 square meters
2. Full automatic control system with touch screen. The fog pile is equipped with PM2.5 sensor and rainfall sensor, which can be controlled by single machine or network
3. The integrated case integrates water pump, water tank and control system, with flexible installation and layout, high wear-resistant nozzle and longer service life.
Power control box
Rotary head and high pressure micro fog engine (outdoor type)
PLC intelligent spray pile
The new intelligent spray pile system is made up of high pressure water supply mainframe, plastic spray rust protection pole (4M 6M's other rod length can be customized), intelligent rotary head and PLC man-machine interaction system.
The new intelligent spray pile is a main and effective dust suppression product for outdoor occasions with large dust emission. Driven by the power source of the water pump, the device pressurizes the water to 80-100kg high pressure, and sprays the fog to an area with a radius of 8-15m through the principle of water fog. The product has the characteristics of intelligent, multi control mode and large dust suppression coverage. It is generally arranged on the site where the dust is concentrated, such as road, storage yard, stock yard, etc.
The unique advantages of PLC human-computer interaction system are as follows:
The main engine of the high pressure water supply can be customized according to the demand. The maximum high-pressure water supply main engine can be towed by 1 stations with 4 intelligent spray piles, which are opened and closed by the solenoid valve. The operation of any single pile and the operation of multiple piles can be realized.
Each head is equipped with an independent electronic pulse type rotating pan tilt, and the rotation speed and rotation angle of the rotating pan tilt can be set at any value through PLC human-computer interaction system（ Speed 0-100%, angle 0-360 °）
The PLC man-machine interaction screen can monitor the running state of the equipment, the real-time running angle of the head, the running speed and the opening and closing state of the solenoid valve.
.
The PLC control system can set up 3 running periods per day (customers can set the time of switching devices arbitrarily according to the actual demand). Each intelligent spray pile can set up the time of opening and stopping independently (the intermittent operation function can be realized).
.
The spray host can also monitor the operation pressure of the equipment through the PLC control system and adjust the running pressure of the equipment in real time.
The spray main engine is equipped with a frequency conversion automatic voltage stabilizing system. It can keep the pressure value constant when switching single pile and multiple piles to prevent pressure rise and fall.
Advantages of the new intelligent spray pile:
The system uses high-pressure main engine, with good atomization effect, less water consumption and saving water resources.
The installation is convenient and the water source is municipal tap water.
Full automatic intelligent control, reduce labor rate, improve operation efficiency.
There is no water on the ground and there is no impact on the traffic.
It can run all day and all area automatically. It can operate normally in high temperature, low temperature and high humidity environment.
Meet the needs of field operations, with wind, rain, dust and other functions, to meet the IP65 protection level.
There is no need to spray water on roads to reduce the operation cost of dust and haze prevention.
The dust and haze removal effect of the system is remarkable, which can control the road dust very effectively.
Configuration of fog pile head
The machine head has a hood, stepper motor control power box, motor driver, PLC controller, touch screen, steel body and other electrical components. Thus, the angle and speed can be adjusted arbitrarily, and the fog pile and water pump can work synchronously. Domestic famous Chint or Schneider or above brands shall be used for electrical components.
A four wire connection method: one drag four, that is, a host pump with 4 fog piles, and the main pump working fog piles simultaneously spray. For power connection, each fog pile needs 220 V power supply, and four fog piles need parallel power supply. The signal (i.e. passive signal line) is generally connected from the water pump to trigger the four fog piles and the water pump to rotate at the same time. The water pipeline also needs to be distributed from the main engine to each fog pile. In general, 304 seamless stainless steel pipe is used for infrastructure construction, and high-pressure steel wire hose is used for connecting fog piles. The maximum pressure of steel hose is 200kg, and the inner hole is generally 6-16mm.
The height of steel body of fog pile is generally 4m, 6m and 12M, and the material is generally 45 # steel, with overall hot-dip galvanizing and plastic spraying treatment. Customers can also make steel parts. The embedded size of steel body is four hole flange, the hole spacing is 170mm for 4m, 240mm for diagonal, 24.8mm for 6m, 340mm for diagonal, 300mm for 12M, 424mm for diagonal.
Prouct dwtail
The product has the characteristics of good atomization effect, low water consumption, flexible installation and layout. It can be installed with multiple units connected to the grid or single unit independently.
1. Long spray distance, the nozzle can be 360 mm ° Rotating, high pressure plunger pump can make jet radius up to 15 meters, covering PFM area of 500-1000 square meters
2. Full automatic control system with touch screen. The fog pile is equipped with PM2.5 sensor and rainfall sensor, which can be controlled by single machine or network
3. The integrated case integrates water pump, water tank and control system, with flexible installation and layout, high wear-resistant nozzle and longer service life.
Power control box
Rotary head and high pressure micro fog engine (outdoor type)
